Invar 36 nickel bar rod Hot sales !

ASTM Invar 36 nickel bar rod Dia:3-500mm Surface:bright black Standard:ASTM AISI Good quality and best service 100% factory

ASTM Invar 36 nickel bar rod

1.Chemical Composition  %

Alloy Grades	Chemical Composition  %
	C	P	S	Mn	Si	Ni	Co	Fe
	Not more than≤
Invar36	0.05	0.020	0.020	0.20~0.60	0.30	35.0~37.0	-----	Balance

2.The Average Linear Expansion Coefficient:

Alloy Grades	Specimen heat treatment system	The average linear expansion coefficient a,10-6/ oC
		20-100 oC	20-300 oC
Invar36	Will be semi-finished specimen heated to 840 ± 10 oC, insulation 1h, water quenching, and then processed into finished specimen, at 315 ± 10 oC, insulation 1h with the furnace cooling or air-cooled.	≤1.5	-----

 

3.Alloy typical expansion coefficient:

Alloy Grades	The average linear expansion coefficient a,10-6/ oC
	20-50 oC	20-100 oC	20-200oC	20-300 oC	20-400 oC	20-500 oC
Invar36	0.6	0.8	2.0	5.1	8.0	10.0

4.Characteristic36 alloy is a special ultra-low coefficient of heat expansion of low-iron-nickel alloy. One of carbon and manganese element of control is very important. Cold deformation can reduce the coefficient of thermal expansion, in particular within the framework of the heat treatment temperature coefficient of thermal expansion will enable stabilization. Has the following characteristics:1.Has very low coefficient of heat expansion between the temperature of -250°C and 200°C.2.Good toughness and plastic

5.Metallurgical structureInvar 36 is the face centered cubic lattice structure

6.Corrosion resistanceInvar 36 has corrosion resistance in the dry air of room temperature. In other harsh environments, such as the humid air, there may be corrosion (rust).

7.Applied fieldInvar 36 suit for need to apply ultra-low coefficient of heat expansion environment. Typical applications are as follows:1.Liquefied gas production, storage and transport 2.The measurement and control instruments work temperature lower than 200°C, such as temperature regulating device 3.Metals and other materials use the screw connector bush 4.Bimetal and bimetallic temperature controller5.Film framework6.Shadow mask